275 kVA Servo Voltage Stabilizer
The 275 kVA Servo Voltage Stabilizer combines durability with precision. Engineered for continuous operation in demanding industrial environments with maximum reliability.
Ref. SVS-275-3PH · Lead time 2 weeks · Made to order from Hapur
See full engineering specification & variants
Key Features
Recommended For
Specifications
| Specification | Value |
|---|---|
| Capacity | 275 kVA |
| Input Voltage | 300V–470V, 3-Phase |
| Output Voltage | 415V ±1% |
| Frequency | 50/60 Hz |
| Response Time | < 20 ms |
| Cooling Method | both air and oil cooled |
| Weight | 1100 kg |
| Warranty | 3 years |
Reading the specification
What these numbers mean for your installation
A datasheet tells you what the unit does. This is what each figure changes about how you specify, feed and site it — worked out for the 275 kVA specifically, not the range in general.
383 A per phase
At 415 V three-phase, 275 kVA works out at roughly 383 A per phase. At 383 A you are normally into parallel cable runs per phase rather than a single conductor. Confirm the terminal chamber accepts the number of runs your cable schedule calls for — discovering it does not, on the day of commissioning, is the most common reason installations at this rating slip.
300V–470V
The unit holds output at 415V ±1% anywhere between 300 V and 470 V in. Pulling a 300 V supply back up to 415 V means adding 115 V — a 38% lift on the incoming supply, with the series winding carrying roughly 76 kVA of the 275 kVA throughput. Below 300 V it runs out of range, and the answer is a wider-window build, not more kVA.
< 20 ms
At this rating the stabilizer is feeding a whole section of the floor, so < 20 ms determines whether one machine's inrush propagates into every other machine on the same board. That is the mechanism behind most "random" tripping complaints we are called out to.
150% for 30 minutes
Direct-on-line starting draws six to eight times full-load current for a few seconds, and 150% for 30 minutes is the margin that absorbs it. At 275 kVA the practical constraint is usually the largest single motor rather than the total: size against that starting current, not against the sum of the nameplates.
Sizing Guide
When is 275 kVA the right choice?
275 kVA is specified by consultants who calculate a connected load between 250 and 300 kVA and want to avoid operating the stabilizer above 90% continuously. Wire drawing plants, cable manufacturing units with extruders, and medium-sized foundries with induction furnaces and auxiliary equipment commonly land in this band. At 275 kVA, the unit is almost always oil-cooled and ONAN-rated — forced cooling fans are typically not required until loads exceed 315 kVA in standard Indian ambient conditions. This size is also chosen for government hospitals when the entire electrical installation (OT, ICU, wards, diagnostics, and HVAC) is protected from a single point.
Before you order
Where 275 kVA goes in, and what the site needs
Typical installations
We supply 275 kVA most often into large manufacturing plants, steel mills, automotive manufacturing and textile mills, alongside chemical processing and power distribution centers. What separates those sites is duty cycle rather than load. A rating that runs cool on single-shift work sits near the top of its thermal range on a continuous three-shift line, and that is the point at which oil cooling stops being optional.
Site preparation
At 1,100 kg this is forklift work, and the forklift has to be rated for 1,100 kg at the extended reach that placement requires. Confirm floor loading before it arrives — a ground-floor workshop slab is normally adequate, a mezzanine generally is not. Leave working clearance on the terminal side for cable entry and inspection. Sustained ambient above 45 °C, or an enclosed room without cross-ventilation, requires derating — send us the room conditions and we will confirm the rating still holds where you intend to put it.
Adjacent ratings
If 275 kVA is not the right size
Sizing rarely lands exactly on a catalogue rating first time. These are the ratings either side of it in the same range — compare the specification before you commit.
250 kVA Servo Voltage Stabilizer
Heavy-duty servo stabilizer designed for 250 kVA industrial operations.
View specificationServo Voltage Stabilizer300 kVA Servo Voltage Stabilizer
Premium servo stabilizer for 300 kVA large-scale industrial operations.
View specificationServo Voltage Stabilizer225 kVA Servo Voltage Stabilizer
High-performance servo stabilizer for 225 kVA industrial facilities.
View specificationServo Voltage Stabilizer325 kVA Servo Voltage Stabilizer
Enterprise servo stabilizer for 325 kVA industrial operations.
View specificationServo Voltage Stabilizer200 kVA Servo Voltage Stabilizer
Enterprise-grade servo stabilizer for 200 kVA heavy industrial loads.
View specificationServo Voltage Stabilizer350 kVA Servo Voltage Stabilizer
Premium servo stabilizer for 350 kVA industrial power conditioning.
View specificationEngineering detail on this configuration
The servo voltage stabilizer pages carry the full design rationale, comparison tables and application notes behind this SKU.
Ready to specify?
Share your load profile. Get a firm proposal in 24 hours.
Send us your kVA requirement, supply voltage range, and site conditions. Our engineer will confirm whether this configuration is correct for your installation, or specify an alternative if needed. No distributors — direct from our factory in Hapur.
Submit load requirements