225 kVA Servo Voltage Stabilizer
Our 225 kVA Servo Voltage Stabilizer offers exceptional performance for medium-to-large industrial complexes. Advanced servo technology ensures stable power for sensitive equipment.
Ref. SVS-225-3PH · Lead time 2 weeks · Made to order from Hapur
See full engineering specification & variants
Key Features
Recommended For
Specifications
| Specification | Value |
|---|---|
| Capacity | 225 kVA |
| Input Voltage | 300V–470V, 3-Phase |
| Output Voltage | 415V ±1% |
| Frequency | 50/60 Hz |
| Response Time | < 20 ms |
| Cooling Method | both air and oil cooled |
| Weight | 905 kg |
| Warranty | 3 years |
Reading the specification
What these numbers mean for your installation
A datasheet tells you what the unit does. This is what each figure changes about how you specify, feed and site it — worked out for the 225 kVA specifically, not the range in general.
313 A per phase
At 415 V three-phase, 225 kVA works out at roughly 313 A per phase. At 313 A you are normally into parallel cable runs per phase rather than a single conductor. Confirm the terminal chamber accepts the number of runs your cable schedule calls for — discovering it does not, on the day of commissioning, is the most common reason installations at this rating slip.
300V–470V
The unit holds output at 415V ±1% anywhere between 300 V and 470 V in. Pulling a 300 V supply back up to 415 V means adding 115 V — a 38% lift on the incoming supply, with the series winding carrying roughly 62 kVA of the 225 kVA throughput. Below 300 V it runs out of range, and the answer is a wider-window build, not more kVA.
< 20 ms
At this rating the stabilizer is feeding a whole section of the floor, so < 20 ms determines whether one machine's inrush propagates into every other machine on the same board. That is the mechanism behind most "random" tripping complaints we are called out to.
150% for 30 minutes
Direct-on-line starting draws six to eight times full-load current for a few seconds, and 150% for 30 minutes is the margin that absorbs it. At 225 kVA the practical constraint is usually the largest single motor rather than the total: size against that starting current, not against the sum of the nameplates.
Sizing Guide
When is 225 kVA the right choice?
225 kVA is an intermediate size that avoids over-specifying when a 250 kVA unit would run at only 70–75% load. Packaging plants running two or three automatic form-fill-seal lines plus conveyors and labellers, and automotive paint shops with spray robots and curing ovens, often have connected loads calculated at 210–225 kVA by their electrical consultants. This size is also common in IT parks where a single floor — 200 workstations, servers, UPS, precision AC units — needs a dedicated stabilizer independent of the building's main feeder.
Before you order
Where 225 kVA goes in, and what the site needs
Typical installations
We supply 225 kVA most often into manufacturing plants, automotive suppliers, chemical plants and textile mills, alongside industrial complexes and heavy equipment facilities. What separates those sites is duty cycle rather than load. A rating that runs cool on single-shift work sits near the top of its thermal range on a continuous three-shift line, and that is the point at which oil cooling stops being optional.
Site preparation
At 905 kg this is forklift work, and the forklift has to be rated for 905 kg at the extended reach that placement requires. Confirm floor loading before it arrives — a ground-floor workshop slab is normally adequate, a mezzanine generally is not. Leave working clearance on the terminal side for cable entry and inspection. Sustained ambient above 45 °C, or an enclosed room without cross-ventilation, requires derating — send us the room conditions and we will confirm the rating still holds where you intend to put it.
Adjacent ratings
If 225 kVA is not the right size
Sizing rarely lands exactly on a catalogue rating first time. These are the ratings either side of it in the same range — compare the specification before you commit.
200 kVA Servo Voltage Stabilizer
Enterprise-grade servo stabilizer for 200 kVA heavy industrial loads.
View specificationServo Voltage Stabilizer250 kVA Servo Voltage Stabilizer
Heavy-duty servo stabilizer designed for 250 kVA industrial operations.
View specificationServo Voltage Stabilizer175 kVA Servo Voltage Stabilizer
High-capacity servo stabilizer for 175 kVA industrial applications.
View specificationServo Voltage Stabilizer275 kVA Servo Voltage Stabilizer
Robust servo stabilizer designed for 275 kVA heavy industrial loads.
View specificationServo Voltage Stabilizer150 kVA Servo Voltage Stabilizer
Compact servo stabilizer for 150 kVA industrial operations.
View specificationServo Voltage Stabilizer300 kVA Servo Voltage Stabilizer
Premium servo stabilizer for 300 kVA large-scale industrial operations.
View specificationEngineering detail on this configuration
The servo voltage stabilizer pages carry the full design rationale, comparison tables and application notes behind this SKU.
Ready to specify?
Share your load profile. Get a firm proposal in 24 hours.
Send us your kVA requirement, supply voltage range, and site conditions. Our engineer will confirm whether this configuration is correct for your installation, or specify an alternative if needed. No distributors — direct from our factory in Hapur.
Submit load requirements