A voltage event isn't a maintenance issue. It's a batch-loss event.
Voltaire builds ±1% servo voltage stabilizers that keep GMP lines, PLC systems, and filling machines inside their validated window — factory-direct, NABL tested, engineered for Indian industrial grids.
±1%
Output voltage regulation
<20 ms
Correction response time
50–500 kVA
Pharma capacity range
NABL
Accredited test reports
In a pharmaceutical plant, voltage is a controlled process parameter
GMP-compliant manufacturing runs on tight tolerances — in chemistry, in temperature, in filling volumes, and in the power supply that drives every one of those controlled parameters.
When voltage drops during a tablet compression run, the compaction force changes. When it spikes during a liquid filling cycle, your filling machine controller resets and the batch is flagged. When phase imbalance causes uneven motor torque on a coating drum, your coating-uniformity data fails QA review. None of these failures are caused by operator error or raw-material deviation. They are caused by an unstable supply that your validation documents assumed would be stable.
Pharma clusters in Maharashtra, Gujarat, and Himachal Pradesh sit on industrial estates that share grid infrastructure with heavy manufacturing — producing voltage events your sensitive process equipment was never designed to tolerate without regulation.
What happens to GMP lines without regulated power
PLC-controlled equipment — blister packing machines, tablet presses, liquid filling lines, autoclaves — stores operational parameters and batch records in volatile and non-volatile memory. Voltage stress attacks both the record and the hardware.
Batch records are corrupted, then rejected
A voltage sag deep enough to reset a processor corrupts the current batch record. Under GMP a batch with an incomplete electronic record cannot be released — it has to be investigated, documented, and in most cases rejected entirely. The cost of a single formulation batch rejection typically exceeds a properly sized stabilizer many times over.
Motor drives degrade years early
Repeated voltage stress on the drives that run your granulator, coater, capsule filler, and HVAC accelerates component wear. Inverter boards rated for eight to ten years under clean power fail in three to four under the conditions typical of Indian industrial estates.
What Voltaire builds for pharmaceutical facilities
For pharma applications we build three-phase servo voltage stabilizers with independent phase control — each phase regulated separately rather than treating the supply as a single entity. Phase imbalance is as damaging as overall voltage variation in sensitive process equipment, and a stabilizer without independent control can hold correct average voltage while letting significant phase-to-phase imbalance pass straight through.
Independent phase control
Each of the three phases is regulated on its own, so phase-to-phase imbalance never reaches your process equipment.
±1% output regulation
Tight enough to keep PLCs, filling controllers, and coating drives inside their validated operating window.
Under-20 ms response
Fast correction rides through grid sags and swells before the load ever sees an interruption.
Built-in bypass switches
Planned maintenance and servicing without taking the line down — continuity your validated process depends on.
Copper-wound, continuous duty
Copper-wound transformers rated for continuous duty in Indian ambient conditions — no summer derating.
Full-load tested before dispatch
Every unit is tested at full load and shipped with NABL test certificates for your regulatory file.
50–500 kVA
Sized to your facility
Capacities for pharmaceutical applications typically range from 50 kVA for single-line protection to 500 kVA for full-plant supply regulation. We assess your entire facility load — process equipment, HVAC, utilities, and laboratory — before recommending a configuration.
Regulatory documentation we provide
Pharmaceutical procurement requires documentation beyond a product warranty. Every Voltaire unit supplied to a pharma facility ships with the paperwork your QA team needs for equipment qualification.
NABL-accredited test reports
Independent, accredited verification of performance for your regulatory file.
IS 9815 compliance documentation
Formal compliance records against the governing Indian standard for servo stabilizers.
IQ / OQ / PQ support
Technical specifications formatted for Installation, Operational, and Performance Qualification protocols — on request.
ISO 9001:2015 certified process
Certification covering the entire manufacturing process, from raw material to dispatch.
Trusted by India's critical infrastructure
Voltaire stabilizers protect critical systems for the Indian Air Force, ONGC, BPCL, and government health infrastructure — facilities where power continuity is not optional. That same engineering rigour is what pharmaceutical clients receive. When there's an issue after installation, you speak to the engineers who built your unit — not a distributor seeing your system for the first time.
Send us your equipment list. We'll size the unit and the paperwork.
Blister lines, tablet presses, filling machines, HVAC load, laboratory equipment — send us the list and we will size a stabilizer that covers your full facility with the regulatory documentation your QA team requires.
Speak to an engineer
+91 7060709795Engineer response within 24 hours. Not a call centre.
Request a specification